![]() Do NOT use abrasives, ammonia, products containing ammonia, or any other corrosive cleaning solutions as this can damage the brass. Once the brass has been cleaned, reapply Renaissance Wax to the entire surface. After cleaning, use a non-aggressive, multipurpose cleaning solvent to degrease the product such as CT1 Multi-Solve, applied with a clean soft cloth. If however if you prefer to remove the patina, it is important to regularly clean the brass using a brass polish such as Brasso, and to clean the entire surface at once. The patina that develops as a result of oxidisation is a natural and beautiful part of the life of the brass product and does not require polishing. To maintain the wax barrier over time, we recommend occasionally reapplying Renaissance Wax following the manufacturer’s instructions. Our brass is coated with Renaissance Wax to slow the oxidisation process. Do NOT use ammonia, products containing ammonia, or any other corrosive cleaning solutions as this can damage the brass.īrass has a tendency to oxidise when exposed to air or direct contact with skin. If the surface is textured, this will remove the oxidisation from the highest points of the textured surface, while the lower parts of the textured surface will continue to oxidise. Clean using a brass polish such as Brasso, and clean all desired areas at once. However, should you wish to polish this brass, we recommend only polishing the raised areas of the overall form, to maintain the original appearance as much as possible. The oxidisation process is chemically accelerated to create burnished brass, meaning this brass already features a patina. Do NOT use ammonia, products containing ammonia, or any other corrosive cleaning solutions as this can damage the brass. After brushing, use a non-aggressive, multipurpose cleaning solvent to degrease the product such as CT1 Multi-Solve, applied with a clean soft cloth following the grain direction. It is very important to always wipe in the direction of the grain of the brushed surface. If however if you prefer to remove the patina, it is important to regularly brush your brass with a fine grit (360 grit) abrasive brushing pad such as a Mirka Mirlon Finishing Pad. ![]() ![]() Prevention is the best protection against surface scratches.īrass has a tendency to oxidise when exposed to air or direct contact with skin. Once the bronze has been cleaned, reapply Renaissance Wax to the entire surface, following the manufacturer's instructions. ![]() If however if you prefer to remove the patina, it is important to regularly clean the bronze using a bronze polish such as Brasso, and to clean the entire surface at once. The patina that develops as a result of oxidisation is a natural and beautiful part of the life of the bronze product and does not require polishing. Our bronze is coated with Renaissance Wax to slow the oxidisation process. Bronze has a tendency to oxidise when exposed to air or direct contact with skin.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |